X-Epil

Silicon Pot

Accessories hair removal

Accessories for X-Epil Professional Wax Heater.

• innovative silicone pot suitable for the X-EPIL Wax Heater.
• made of 100 % silicone
• guarantees clean and fast work - no more sticky wax pots!
• 500 ml suitable for heating depilatory wax, such as film wax, wax beads, water- and oil-soluble hot waxes
• temperature resistant up to 200 °C
• does not produce toxic fumes or unpleasant odor during heating
• thanks to the 2 side handles, the pot can be easily lifted and removed from the X-EPIL Wax Heater
• easy to clean! Film waxes as well as yellow and green wax beads can be easily removed from the silicone pot as a wax plate after cooling. Any wax residue can be removed with water and a dishwashing detergent.
• diameter 110 mm, height 71 mm
• available colors: white, mint, pink, blue

Instructions:

How to use the Silicon Pots / Silicone Pots with the X-EPIL Wax HEATER and with X-EPIL Film Wax, Yellow and Green Wax Beads:

1. remove the aluminum pot from the Wax Heater and place the silicone pot inside.

Fill the silicone pot with the required amount of wax, e.g. film wax. 3.

Heat the wax with the Wax Heater to the correct temperature (see temperature instructions on the packaging). 4.

4. if you want to work with different waxes, carefully remove the silicone pot by lifting it up by the 2 handles on the side. When doing so, make sure that your fingers do not touch the aluminum insert inside. Danger of burns! Place the pot with the still liquid wax on a temperature-resistant surface. Fill a new silicone pot with a different wax and place the pot in the Wax Heater. Also, make sure that your fingers do not touch the inside aluminum wall of the Wax Heater.

5. after the wax has cooled down: grab both sides of the silicone pot and press with your fingers additionally from below against the bottom of the silicone pot. The wax comes off as a whole wax plate and can be reused.

Tip: In the case of water-soluble wax, allow the wax to cool to approx. 45° and then fill it back into the wax pot. The silicone pot can then simply be cleaned with warm water and, if necessary, a little washing-up liquid.