X-Epil

Professional wax warmer

Wax heating pot

Wax Heater with digital thermostat control, aluminum pot and lid. For heating film wax, wax beads, water and oil soluble hot waxes.

• exact digital temperature adjustment, by degrees from 35° to 125
• removable aluminum pot (500 ml)
• transparent lid
• innovative accessories optional: special silicone pots for clean and fast applications

Instructions:

How to use the Silicon Pots / Silicone Pots with the X-EPIL Wax HEATER and with X-EPIL Film Wax, Yellow and Green Wax Beads:

1. remove the aluminum pot from the Wax Heater and place the silicone pot inside.

2. fill the silicone pot with the required amount of wax, e.g. film wax.

Heat the wax with the Wax Heater to the correct temperature (see temperature instructions on the packaging). 4.

4. if you want to work with different waxes, carefully remove the silicone pot by lifting it up by the 2 handles on the side. When doing so, make sure that your fingers do not touch the aluminum insert inside. Danger of burns! Place the pot with the still liquid wax on a temperature-resistant surface. Fill a new silicone pot with a different wax and place the pot in the Wax Heater. Also, make sure that your fingers do not touch the inside aluminum wall of the Wax Heater.

5. after the wax has cooled down: grab both sides of the silicone pot and press with your fingers additionally from below against the bottom of the silicone pot. The wax comes off as a whole wax plate and can be reused.

Tip: In the case of water-soluble wax, allow the wax to cool to approx. 45° and then fill it back into the wax pot. The silicone pot can then simply be cleaned with warm water and, if necessary, a little washing-up liquid.